9
Install the Camera(s)
1
Position the camera where you want it, plug it into power, and check video on the NVR. Move the
camera if the view is not what you want.
2
Hold the base of the camera stand where you want to mount it and mark the location of the screw
holes.
3
Use the included screws and anchors to attach the base to the wall or ceiling.
4
Tug gently on the stand to make sure it is securely in place.
4.3 Set the Antenna Extension
The included antenna extension is supplied to extend the transmitting distance between the camera and
NVR and provide a better signal.
You can use the included Antenna Extension cable
if your setup requires the signal be transmitted
through an obstacle that severely weakens it.
Simply replace the camera antenna with the
Antenna Extension cable and mount it on the
opposing side of the obstacle.
5. SYSTEM OPERATION
5.1 Setup Wizard
Before using the system, please follow the setup wizard to set your system.
NOTE:
Among this section, for each step, on the bottom will display a notification to let you
select/unselect.
Default value: select.
Select means next time you reboot/turn on the NVR, system will remember your previous setting and skip
the setup wizard surface to enter the live view section directly.
Unselect means you have to follow the setup wizard every time reboot/turn on the NVR.
