5
7
Bracket
Use the bracket to mount the camera on a wall or other flat
surfaces.
8
Pair button
The pair button is located on the back of the camera. Press pair
button when monitor is in pairing mode.
9
Deterrent light
Deterrent light flashes when motion detected.
3.
Set up the Hardware
3.1 Monitor
1. Flip out the stand on the back of the monitor and position the antenna.
2. Insert the Micro SD memory card into the card slot on the monitor until you
hear a
“click”.
3. Connect an AC adapter to the power input on the back of the monitor.
Connect the other end of the adapter to a standard indoor power outlet.
4. Push and hold the power button to turn on the monitor.
5. The monitor displays the start up UI for a few seconds and then transitions to
the LIVE view.
3.2 Camera
3.2.1 General
The cameras included with your monitor are weatherproof and have an IP66
rating. Water can be sprayed on them and they will still work; however, the
cameras cannot be submerged.
The cameras can be exposed directly to the rain, it is recommended that, if they
are used outdoors, they should be mounted under some type of cover like a patio
overhang or eave. As rainwater drops on the camera glass, it may create spots
that will reflect the light from the infrared LEDs used for night vision, thus causing
lower quality video.
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can
reflect light from the infrared LED and might lower video quality. Periodically
