background image

2

Circuit Breaker

(Trip breaker for the

circuit you will be

working on)

Fuse Box

(Remove fuse for the

circuit you will be

working on)

18" 

↑↑↑↑↑

84" 

↑↑↑↑↑

70"

↑↑↑↑↑

SAFE USE

CAUTION: RISK OF ELECTRICAL SHOCK!  All wiring must be performed in accordance with national and local
electrical codes.  If you are unfamiliar with the wiring codes, you should use a qualified electrician.  To avoid overheating
and possible damage to other equipment, do not install control to a receptacle, fluorescent light fixture, motor operated
appliance, or transformer-supplied appliance.

• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan

installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling
installations.

This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum
current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light
current is about 1 amp or 100 watts of lighting.

Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make
sure all wires are within the canopy and that no wires are being pinched.

For best performance and for your warranty to be valid,

use only genuine Casablanca blades, light fixtures, and accessories.

INTRODUCTION

The blades in each pack are matched for equal weight to
assure smooth fan operation. If more than one fan is being
installed, be careful not to mix blades from different
cartons.

Inspect the contents of your carton for possible shipping
or handling damage and report any such damage directly
to your authorized Casablanca dealer.

It is always a good idea to have an assistant to help with
the installation.

When cleaning, painting, or working near your fan, be
very careful of the fan and blades. Always turn the power
OFF to the ceiling fan before servicing it, working on it,
or replacing lightbulbs.

Never insert anything into the path of the fan blades while
the fan is in operation.

• Never install a fan over a pool or spa.

Never operate a fan that has been damaged in any way.
Contact Casablanca Fan Company by calling
1-888-227-2178, or contact your local authorized
Casablanca dealer for assistance in obtaining service.

BEFORE YOU  START

Summary of Contents for Silhouette II

















Reviews: