background image

1

CIRCUIT BREAKER

(TRIP BREAKER FOR THE

CIRCUIT YOU WILL BE

WORKING ON)

FUSE BOX

(REMOVE FUSE FOR THE

CIRCUIT YOU WILL BE

WORKING ON)

The blades in each pack are matched for equal
weight to assure smooth fan operation. If
more than one fan is being installed, be care-
ful not to mix blades from different cartons.

Inspect the contents of your carton for pos-
sible shipping or handling damage and report
any such damage directly to your authorized
Casablanca dealer.

It is always a good idea to have an assistant
to help with the installation.

When cleaning, painting, or working near
your fan, be very careful of the fan and blades.
Always turn the power OFF to the ceiling fan
before servicing it or working on it.

Never insert anything into the path of the
fan blades while the fan is in operation.

• Never install a fan over a pool or spa.

Never operate a fan that has been damaged
in any way. Contact Casablanca Fan Company
by calling 1-888-227-2178, or contact your
local authorized Casablanca dealer for assis-
tance in obtaining service.

CONTENTS

SAFE USE

INTRODUCTION .......................................................................................................................................... 1
MOUNTING RECOMMENDATIONS .................................................................................................................. 2
FAN INSTALLATION - GETTING STARTED ...................................................................................................... 3
ADAPTOR PLATE INSTALLATION ................................................................................................................... 4
FAN PREPARATION ..................................................................................................................................... 5
INSTALLATION & WIRING ............................................................................................................................ 6
LIGHT FIXTURE INSTALLATION ................................................................................................................... 9
NO LIGHT FIXTURE OPTION ....................................................................................................................... 10
INTELI•TOUCH CONTROL OPERATION ......................................................................................................... 12
TROUBLESHOOTING .................................................................................................................................. 15

P/N 9643010 REV. B     P/D FEB00PDG

18

84

74

READ AND SAVE THESE INSTRUCTIONS

All wiring must be in accordance with the National Electric Code ANSI/NFPA 70-1993 and the appropriate local electrical
codes. The National Electric Code requires proper grounding as a precaution against electrical shock. A qualified electri-
cian should be consulted if you are unsure.

• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan

installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling
installations.

This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum
current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light
current is 2.8 amps or 340 watts of lighting.

Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make
sure all wires are within the canopy and that no wires are being pinched.

For best performance and for your warranty to be valid,

use only genuine Casablanca blades, light fixtures, and accessories.

Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the
product and proper installation; therefore, before attempting to install and operate your Casablanca
fan, read this owner’s manual completely and carefully. Retain this manual for future reference.

SAFETY FIRST

BEFORE YOU START

CAUTION: To avoid possible electrical shock, make certain that electricity is turned off
at the circuit breaker or fuse box before attempting any installation procedure.

Summary of Contents for Nouvelle


















Reviews: