background image

www.CasablancaFanCo.com

1.888.227.2178

M8503-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

17

Operation

Quickly press the up or down arrow to turn the 

lights off and on. Hold the up or down arrow to 

dim or raise the light level. The reverse button 

changes the direction that the blades turn. The 

power button turns the fan off and on.

Dimming Mode: 

If you are using dimmable 

bulbs, you must first set your remote to 

Dimming Mode. To toggle Dimming Mode on 

or off, hold down the Fan Power button while 

pressing the Light Down arrow twice.

ON

Turn P

ow

er

Lights 

Down

Fan  

Speed

Reverse

Battery 

Holder

Fan 

Power

Lights   

Up

Fan 

Speed

 (Low)

(High)

Before operating the wall control, 

press on the battery door to eject it. 

Unscrew the battery holder. Insert the 

battery, found in the control hardware 

bag, with the positive (+) side facing 

downward. Reinstall the battery 

holder and reinsert the battery door 

into the wall control.

Battery

Battery 

Holder

Battery 

Door

The remote transmitter is already paired 

to the receiver and ready to use.

Note:

 If you would like to operate 

multiple fans or multiple remotes, 

or if your remote is not working, 

please see the Troubleshooting 

section at the end of this manual.

Summary of Contents for M8503-01





















Reviews: