I
sotope
®
13
Before
Before
After
After
Figure 19
Figure 20
Figure 22
Figure 21
Figure 23
WARNING! This device complies with Part
15 of the FCC Rules. Operation is subject
to the following conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
Fan
Power
4
Lights
Down
Fan
Speed
Reverse
Battery
Holder
Fan
Power
Lights
Up
Fan
Speed
(Low)
(High)
1.
Before operating the wall control, open the
battery holder by pressing in on the battery
door. Remove the protective film from the
battery. Replace the battery holder. Figure 21.
2.
The fan must be paired before it will operate.
See Pairing the Remote, page 14.
3.
Quickly press the up or down arrow to turn the
lights off and on. Hold the up or down arrow
to raise or dim the light level. The reverse
button changes the direction that the blades
turn. The power button turns the fan off and
on. Figure 23.
4.
The reverse button on the wall control changes
the air flow pattern. In warm weather, use (a)
downward air flow pattern. In cold weather, use
(b) upward air flow pattern. Figure 23.
WALL CONTROL OPERATION
Before
Before
After
After
5.
Insert the wall control into the outlet box and
secure the two screws using a Phillips head
screwdriver. Figure 19.
6.
Install the cover plate using a Phillips Head
screwdriver to secure the two cover plate screws.
Figure 20.
BATTERY
DOOR
