www.CasablancaFanCo.com
1.888.227.2178
M8552-01 • 03/04/19 • © 2019 Casablanca Fan Company
Connect the white
(grounded) wire
from the ceiling
to the white wire
from the fan.
Cap the blue wire from the
fan.
You will not need it
for single switch wiring.
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the fan.
Connect the grounding
wires (green, green/yellow
stripe, or bare copper)
coming from the ceiling,
ceiling plate, and the fan.
Blue
Black
Gr
een/Y
ello
w Stripe
White
Ung
rounded
Grounded
Grounding
Grounding
Wiring: Single Switch
Refer to CAUTION c.1 on pg. 2
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Have a single switch?
Follow these steps:
Dual Switch
Instructions
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then
twist clockwise until tight.
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
6
