www.CasablancaFanCo.com
1.888.227.2178
16
M8552-01 • 03/04/19 • © 2019 Casablanca Fan Company
Wall Control For Dual Switches
Ensure the power is OFF at the outlet
box and wall switch location before
proceeding with installation.
Turn
Pow
er
OFF
3
Turn off the power
1
Installing the battery
To access the battery compartment,
slide the battery door up.
Replace the used battery with two AAA
batteries when needed.
1. Turn on power for the fan.
2. Push both existing wall switches to
the on position.
3. Press the Fan and Light button on
the Casablanca Wall Control.
4. Your fan’s light and fan should be
on.
5. Push each of your existing wall
switches into the off position one at
a time to determine which switch
controls the Light.
6. The Light switch will not be
replaced when installing the
Casablanca Wall Control. You may
find it helpful to mark the Light
switch with a pencil or some other
non-permanent mark.
Battery
Door
Verify which switch controls the fan light.
ON
Turn
Pow
er
2
To install the Casablanca Wall Control into a dual switch location,
you will need a wall plate with both a standard switch and rocker
switch cut-out (sold separately).
IMPORTANT
If you are unfamiliar or
uncomfortable with wiring, please
contact a qualified electrician.
(Sold Separately)
