9
OPTIONAL LIGHT
PULL CHAIN
SWITCH
REVERSE
SWITCH
3-SPEED
♦
OPERATION
Pull-chain switches on the fan control the fan and lights.
Using the fan control pull-chain switch: Fan off at start.
• First pull:
fan ON, low speed
• Second pull:
medium speed
• Third pull:
high speed
• Fourth pull:
fan OFF
Using the optional light pull-chain switch: Light off at start.
• First pull:
light ON
• Second pull:
light OFF
Direction of blade rotation is controlled by the reverse slide
switch on the side of the switch housing.
No changes in household wiring are required.
3-SPEED
♦
OPTIONAL WALL CONTROL
♦
W-4
The W-4 wall control provides four-speed control of fan from a convenient wall location. The
W-4 is designed to replace a standard wall switch and will fit wall boxes with a depth of 2"
or greater.
Not for use with single pull-chain fan/light option wiring.
To install a W-4 wall control in place of an existing wall switch, follow the instructions on
the W-4 package.
Note: No rewiring is required if the fan is replacing an existing light fixture.
Operation of the fan from the wall switch is simple:
1. Turn knob to obtain desired speed setting.
R
3-SPEED
♦
OPTIONAL WALL CONTROL
♦
W-8
The W-8 wall control provides separate control of fan and light with two separate knobs from
a convenient wall location. The W-8 is designed to replace a standard wall switch and wall
boxes with a depth of 2" or greater. Requires two hot leads from wall box to ceiling wiring
box.
To install a W-8 wall control in place of an existing wall switch, follow the instructions on
the W-8 package.
Operation of the fan from the wall switch is simple:
1. Turn the upper knob to the desired fan speed.
2. Turn the lower knob to the desired light setting.
LO
FAN & SPEED
CONTROL
PULL CHAIN SWITCH
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of
the fan and damage to the W-4 wall control. To confirm fan is set to HIGH: Turn W-4 fan
speed switch to 'HI' - set fastest fan speed with pull chain.
CAUTION! Failure to set the pull-chain speed to HIGH can result in faulty operation of
the fan and damage to the W-8 wall control. To confirm fan is set to HIGH: Turn W-8 fan
speed switch to 'HI' - set fastest fan speed with pull chain.
I N S U M M E R
, the movement of
air creates a cooling “wind chill”
effect. A room can actually feel
several degrees cooler, without set-
ting the thermostat lower.
I N W I N T E R
, hot air rises to the
ceiling while cool air settles to the
floor. Trapped against the ceiling,
the warm air is wasted. If you turn
up the thermostat, energy costs
will rise.
R U N N I N G I N R E V E R S E
, your
Casablanca fan can recirculate
warm air near the ceiling down
into the living area, providing even
heating and comfort (with a pleas-
ant effect on heating bills).
SAVING MONEY WITH YOUR CEILING FAN
3-SPEED
