background image

13

C

ottage

 W

et

fan finishes

•  For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish.
•  A vacuum cleaner brush nozzle can remove heavier dust.
•  Surface smudges or an accumulation of dirt and dust can be removed easily using a mild detergent and slightly dampened 

soft cloth. an antistatic agent may be used, but 

never use abrasive cleaning agents

 as these will damage the finish.

Blades

•  Wood-finish blades should be cleaned with a furniture polishing cloth. Occasionally, a light coat of furniture polish may be 

applied for added protection and beauty.

•  For painted, high-gloss or plastic blades (ABS),  surface smudges or an accumulation of dirt and dust can be removed easily 

using a mild detergent and slightly dampened soft cloth. an antistatic agent may be used, but 

never use abrasive cleaning 

agents

 as these will damage the finish.

no need for lubrication

• 

Never lubricate this fan! 

 The precision motor at the heart of your Casablanca fan features sealed bearings that are lubricated 

for life. 

•  Do not attempt to oil the motor.

Changing lightbulbs

•  Be sure to turn the power to OFF at the wall switch or circuit breaker before changing lightbulbs.
•  Replace bulbs with the same type as you removed from the light fixture. 
•  The maximum wattage rating for this fan’s light kit is 240 watts.

caRe RecoMMendaTIonS

for questions or to locate the nearest Casablanca authorized Service Center call toll free: 1-888-227-2178  

or visit us on the Web at:  www.casablancafanco.com

pRoducT SpecIFIcaTIonS

Model name: 

Cottage

 Wet

Model number:  C12dXXd

Dimensions: 

A =  12”

 

B  =  13”

 

C = 

3”

 

D =  13.3”

 

E  =  5.6”

Weight: 

18 lbs.

Motor: 

188 x 20mm direct drive

tM

Blade Span: 

52” 

Blade iron Pitch:  15°

no. of Blades: 

5

technology: 

3-Speed

 

Airflow:

 

 

6,361 cfm

Electricity Use*:

 

 

85 watts

Airflow Efficiency*:

   

77.3 cfm/watt

* Performance data is for fan only. no lighting wattage is included. 

notE: dimension B 

includes light fixture 

and glass.

Summary of Contents for Cottage Wet














Reviews: