8
INSTALL THE SWITCH HOUSING
Step 12
Remove the three screws on
the mounting plate. Line up the three
threaded holes in the rim of the switch
housing with the three clearance holes
in the mounting plate. Carefully slide the
switch housing intothe mount so that the
threaded holes are directly behind the
clearance holes. Install the three screws
and tighten securely
by hand only.
CAUTION! Make sure that no wires
are pinched by the switch housing
before tightening screws.
Step 11.
For 3-Speed models only:
Hold
the switch housing up to the fan and con-
nect the motor plug to the switch housing
socket. The connector is keyed to ensure
correct installation.
3-SPEED ONLY: ATTACHING SWITCH HOUSING WIRES
SWITCH
HOUSING
CONNECTOR
(SOCKET)
MOTOR
CONNECTOR
(PLUG)
Note:
You may need to arrange the
electronics inside the switch housing
to make room for the connector.
WARNING: Do not force the con-
nectors– check that they are ori-
entated so the keying will match!
MOUNTING
PLATE SCREWS
(3)
