background image

www.CasablancaFanCo.com

1.888.227.2178

18

M8503-01 • 04/23/13 • © Casablanca Fan Company

Troubleshooting

AUTHORIZED SERVICE CENTERS 

For the most updated listing of Casablanca Authorized 
Service Centers, visit www.CasablancaFanCo.com or 

call toll free 1-888-227-2178.

    Excessive wobbling

•  Tighten all of the blade and 

blade iron screws until they 
are snug.

•  Turn the power off, support 

the fan carefully, and check 
that the hanger ball is 
properly seated.

• 

Use the provided balancing 
kit and instructions to balance 
the fan.

    Noisy Operation

•  Tighten the blade and blade 

iron screws until they are snug.

• 

Check to see if any of the 
blades are cracked. If so, replace 
all of the blades.

    Remote doesn’t work

• 

Install a fresh battery in the wall 
control.

• 

Make sure you have paired the 
remote.

    Fan doesn’t work

•  Press a fan speed button (1-4).

• 

Check the circuit breaker to 
ensure the power is turned on.

• 

Check the wall control battery.

• 

Make sure that you have paired 
the wall control.

• 

Make sure the blades spin freely.

•  Turn off power from the circuit 

breaker, then loosen the canopy 
and check all the connections 
according to the wiring diagram 
on page 10-11.

• 

Check the plug connection in 
the switch housing.

Summary of Contents for 55035



















Reviews: