background image

www.CasablancaFanCo.com

1.888.227.2178

M8503-01 • 04/23/13 • © Casablanca Fan Company

16

Operation

Quickly press the up or down arrow 

to turn the lights off and on. Hold 

the up or down arrow to dim or 

raise the light level. The reverse 

button changes the direction that 

the blades turn. The power button 

turns the fan off and on.

The fan must be paired before 

it will operate. Press the “4” 

button and the fan power 

button simultaneously for at 

least three seconds. The fan 

will turn at the lowest speed 

signifying that the remote 

pairing process is complete.

ON

Turn P

ow

er

Lights 

Down

Fan  

Speed

Reverse

Battery 

Holder

Fan 

Power

Lights   

Up

Fan 

Speed

Fan 

Power

4

 (Low)

(High)

Once the power 

is turned on, the 

remote must be 

paired within 

three minutes. 

Pairing is only 

required once 

after initial 

installation.

Before operating the wall control, 

press on the battery door to eject it. 

Unscrew the battery holder. Insert the 

battery, found in the control hardware 

bag, with the positive (+) side facing 

downward. Reinstall the battery 

holder and reinsert the battery door 

into the wall control.

Battery

Battery 

Holder

Battery 

Door

Summary of Contents for 55035



















Reviews: