Insert wires existing from Light Kit Fitter by passing through center hole and
attach Light Kit Fitter to Switch Housing Cover with threaded tube and /or
fasten with spring washer and hex nut.
Take switch housing corer off by loosening 3 screws and remove center nut from switch housing cover.
( 1 ). White wire from Light Kit to white wire
from fan and connect by wire nut.
( 2 ). Black wire from Light Kit to blue wire
from fan and connect by wire nut.
13. Make wire connections for light kit
13. Make wire connections for light kit
Switch Housing
Screw
Wire Nut
Switch Housing
Cover
Black Wire
Light Kit Fitter
Blue Wire
White Wire
White Wire
P6
14. Light Kit And Glass Shade Installation
14. Light Kit And Glass Shade Installation
14a.
Install light bulb into socket
.
14b.
Attach glass shade to light
fixture and rotate glass shade
clockwisely to light kit pan.
Attach switch housing cover and light kit assembly to switch housing by 3 original screws.
15. Turn on the power - your fan is ready for operation.
15. Turn on the power - your fan is ready for operation.
