Casa Systems C100G, Command Reference Manual

Page: 3 / 26

1
Lab Guide CLI Conversion
Table; Casa to ARRIS
Function Casa Command ARRIS Command
show cable modem show cable modem
show ip route show ip route
enable enable
exit exit
ping < ipaddr> ping { ipaddr}
show run show
config configure
{terminal|memory|network|overwrite-
network}
copy < orig> <dest> copy < orig> <dest>
copy run start write [memory|terminal|network file|erase]
del < filename> delete <filename>
del startup-config erase startup-configuration
Redundancy
High Availability on by default.
CPU Redundancy SMM HA: (RSM) Redundancy
show current status show system show linecard status
force failover ha module < module # > protect Contact ARRIS Technical Support
show sync status show smm sync-status
I/O Module Redundancy I/O HA: CAM Sparing
show current status show ha configuration show spare-group
show linecard status
force failover ha module < module # > protect configure slot <slot> shutdown
configure slot <slot> no shutdown
Image and File
Management
copy a configuration file copy nvram startup-config nvram
prep-upgradeX
copy /system/cfgfiles/< filename>
/system/cfgfiles/< newfilename >
show files and directories ls dir
show c:[ all | filesys]
tftp config file to server copy nvram prep-upgradeX tftp
10.4.1.3
copy /system/cfgfiles/< filename >
tftp://< tftpserver ip address >/< filename>
show current software
version
show bootdev show version detail < 6 | 7 >
show image
ftp a new software version
to the CCAP
copy ftp <your username> 10.4.1.3
ccsi.gz.rel7.7.0.0_build4479 nvram
copy
ftp://login:password@ftpserverip/< image
name> /loads/ <image name>
apply a service patch to an
image
system patch apply
classpatch_pb31ba.tgz
patch install < patch file>
remove a patch remove patch
classpatch_pb31ba.tgz
patch remove < patch file >