CAS ScanMaster M1, Quick Use Manual

Page: 25 / 26

Precautions
Weigh
：
◼
Do not make the scale subject to excessive impact, which may easily lead to sensor damage
◼
Avoid use where temperature changes occur
◼
Do not use in environments with vibrations
◼
Away from electromagnetic interference
◼
Weighing object shall not be greater than 60kg (full range)
Dimensioning
：
◼
Place the measured object as close to the center of the table as possible
◼
Avoid the swaying of the measured object in the detection process, and choose the easy and
stable way to put it
◼
Avoid direct sunlight
◼
The overall size of the object to be measured shall not exceed 600*600*600(mm).
Scan Barcode
：
◼
The area with bar code should not be close to the edge of the test table, the edge of the table
is easy to lead to incomplete identification
◼
Avoid direct sunlight which may cause the surface of some materials to reflect light
◼
Barcodes below 8mils cannot be automatically identified
Battery
：
◼
Low battery warning prompt timely charging, to avoid battery damage caused by complete
battery feed
Shutdown
：
◼
Shut down the equipment must first shut down the computer and then turn off the power
behind the total, direct power off easy to cause file damage