Road Weigher
▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩
▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩▩
CAS Portable Wheel Scale
Ref 1. If Zero calibration is done without any error, GOOD message is
displayed ,and program automatically moves to CAL 5.
Ref 2. If the zero value is too high, ERROR message (ERR 26) is displayed.
Ref 3. Zero calibration can be done independently. If you press ZERO key
instead of Enter key, zero calibration will perform.
After that, it will be moved to SAVE & EXIT mode.
CAL 5
FUNCTION
: Span Calibration Function
Key
Display
Description
ENTER:
Span calibration and
Move to the next menu.
CAL 5
CAL 5 Condition
LOAd
Load the weight which was set in
CAL 3.
Setting weight
It is displayed the setting
weight. And then, press Enter key.
- - - - - -
Under span calibration.
GOOd
Span calibration is completed.
Check whether the displayed weight
is same with setting weight.
Save
Calibration is completed.
Under this condition, release the
load.
Press the "ENTER" key to save
the value.
Ref 1. If Span calibration is done without any error, GOOD message is displayed
The weight of setting weight is displayed on Display screen.
Check the weight.
Ref 2. If the span is low, Error message (ERR 24) is displayed.
Calibrate with lower resolution.
Ref 3. After setting the exact value, remove the setting weight and Press the
"ENTER" key to save the value.
Ref 4. In case of setting F13, it can be moved to another Platform.
If all of platform is finished, it will be moved to Normal Mode.
