CAS NT-302A Page 44 Manual Download

Page: 44 / 44

WARRANTEE CETIFICATION

This product is passed “ CAS ”s strict quality test.

If there is defect of manufacturing or abnormal detection within warrantee period, please

contact our Agent or Distributor with this Warrantee certificate.

Then, we will repair or replace free of charge.

WARRANTEE CLAUSE

1. The Warrantee period, we can guarantee, is one(1) year from your purchasing date

2. Warrantee Exception Clause

- Warrantee period is expired.

- Any kinds of Mal-function or defection caused by Modification or Repair without CAS

permission.

- Any kinds of Mal-function, Defection, or External damage, caused by operator

- Any kinds of Mal-function, Defection, caused by using spare part from Non-Authorized

Distributor or Agent.

- Any kinds of Mal-function, Defection, caused by not following Warnings or Cautions

mentioned on this manual.

- Any kinds of Mal-

function, Defection caused by “Force Majeur”, like Fire, Flood.

- Without presentation of this

“Warrantee Certification”.

3. Other

Any kinds of “Warrantee Certification” without authorized Stamp is out of validity

Product

Digital Weighing Indicator

Model

NT-302A

Serial No.

AUTHORIZED

STAMP

Summary of Contents for NT-302A













































Search results

Summary of Contents for NT-302A

Reviews:

Related manuals for NT-302A

Brands by name

Popular brands

CAS NT-302A, Manual

Search results

Summary of Contents for NT-302A

Reviews:

Related manuals for NT-302A

Brands by name

Popular brands