CAS MD2540, Owner'S Manual, Page: 21 / 31

41 40
TO SET CLOCK
When new batteries are installed
1. “YEAR” will blink on display automatically.
2. Press [ ] / [ ] to select current Year.
3. Press [ ] button to confirm and “MONTH” will display.
4. Press [ ] / [ ] to select current Month.
5. Press [ ] button to confirm and “DAY” will display.
6. Press [ ] / [ ] to select current Day.
7. Press [ ] button to confirm and “HOUR” will display.
8. Press [ ] / [ ] to select current Hour.
9. Press [ ] button to confirm and “MINUTE” will display.
10. Press [ ] / [ ] to select current Minute.
11. Press [ ] button to confirm and clock setting is done.
12. The set date and time will be displayed.
At any time
1. [ ] button to when the device is off,
2. Date and time will be displayed.
3. Press and hold [ ] button for 3 seconds and “YEAR” will blink.
4. Follow the same procedure above to set clock.
1. Pass the end of the cuff furthest from the tubing through the metal ring to form a loop.
The smooth cloth should be the inside of the cuff loop.
2. Put your left arm through the cuff loop. The bottom of the cuff should be approximately 2-3 cm
above the elbow. The white artery mark on the cuff should lie over the brachial artery on the inside
of the arm. The tube should run down the centre of arm and even with the middle finger. Do not
place the arm cuff over heavy clothing (e.g. jacket or sweater sleeve) as the blood pressure
monitor will not be able to take proper measurement. Blood circulation in the arm should not be
restricted by tight clothing or other objects.
3. Pull the cuff so that the top and bottom edges are fit evenly around your arm.
4. When the cuff is positioned correctly, press the sewn hook material firmly
against the pile side of the cuff.
5. Make certain the cuff fits snugly around your arm.
The cuff should make good contact with your skin.
6. If the cuff is assembled correctly, the sewn hook material will be on the outside of
the cuff loop and the metal ring will not touch your skin.
7. Insert the cuff tubing into the socket on the left side of the unit.
Make sure it is inserted firmly in the main unit that there are no kinks in the cuff tubing.
TO APPLY ARM CUFF
2-3 cm