CAS HDI, User Manual, Page: 11 / 19

12
4. Weight Comparison Function(HI/OK/LOW)
①
Press the MODE key until
the display shows “WL OFF”.
It means that weight limit
function is deactivated.
②
Press the SAMPLE key to
activate this function, the
display shows “WL ON”.
③
Press the SET key to set up
low value, the display shows
“000.00”.
④
Press the HOLD(▲) or
PRINT(▼) key to have
number up or down. To enter
next digit, press the SAMPLE
key.
⑤
Press the SET key to set up
high value, the display
shows “H000.00”.
⑥
Press the HOLD(▲) key
to have number up or
down. To enter
next digit, press the
SAMPLE ( ) key.
▶
⑧
If you set up LOW/HIGH limit wrong, “WL ERR” will be shown on the display. Then you have to set it
up again. For example) LOW=100.00kg HIGH=90.00kg

High limit is lower than Low limit.
⑨
Press the MODE key to go to weighing mode.
⑦
Press the SET key, the display shows “End”.