17
●
The fourth step is for storing address cell. There are two memory spaces :
Direct memory / In-Direct memory:
[Into direct memory]
Press one of
Direct memory
keys (Total 24 keys) which you want to use stored values for recalling.
Then, the scale will be back to the normal counting mode directly.
[Into indirect memory]
Input an address number by using Numeric key(1~100) and Press
ENTER
key to confirm it.
Then, the scale will be back to the normal counting mode directly.
※
1) An error massage “E4” appears if the address code is out of “1 ~ 100”.
Then press
MOVE
key to return to last step. Press
CANCEL
key to exit the storing mode.
2)
When the address number has been used, the display will be shown as below.
At this time, if you want to still use the address number, press
ENTER
key to confirm it
If you want to change the address number, press MOVE key to go back to the fourth step again.
Summary of Contents for ECB Series
