background image

11

10

3. OPERATION

Check self test of display by pressing ON switch. It will turn to initial display 

condition.(ON/OFF button wouldn’t work while the scale’s power is in OFF.)

The ON/OFF key of remote control: Turn on and off of display only.

(LED TYPE)

BATTERY: Return to normal mode from battery save mode. Press any key on 

the scale or ON/OFF button of remote control.(LED TYPE)

4. HOLD FUNCTION

Auto Hold Function

Press HOLD key when the display shows “    ”.
“                                   ” will displayed and HOLD lamp will be on.
In case of weighing moving thing, “              ”will appear after the weight is 

stable. After that, mean value will be displayed.

Displayed value will remove when you remove things from the hook.

And HOLD lamp still is on. In case of weighing moving things.

“              ”will appear again after the weight is stable.
When you need to turn to normal mode from the automatic hold mode,

press HOLD key when the display shows “    ”.
A message that “                                   ” will be displayed, at the time HOLD
lamp is off.

Manual Hold Function

Press HOLD key after weighing moving things. “HOLD” message will appear 

and little while after mean value would be displayed.

To remove manual hold made, automatically return to the normal mode by

removal things from the hook.

USAGE OF BATTERY CHARGER

Check the voltage of battery charger before use.

(It is fixed to 220V before delivered.)

Insert charger into the power source and connect the discharged battery to the 

connector.

Turn on the switch on the battery charger, charging will start.
While charging, the charge lamp in charger is on.

After the battery is fully charged, the full lamp is on.

Estimated time for the charging is 8 hours.

(Charging time can be varied according to the battery condition.)

PRODUCT SIZE

370

E

232

D

A

158

C

B

F

MODEL CAPACITY GRADUATION

A B  C D E WEIGHT

F

0.5THB

500kg 200g 

350 57.1  82  30  26 

15kg 

26

1000LB 0.5LB

6.8LB

1THB

1TON 500g 

350 57.1  82  30  26 

15kg

26

2000LB 1LB

2THB

2TON 1kg 

430 57.1  91  47  45 

20kg

30

5000LB 2LB

9.1LB

3THB 3TON 

2kg  430 

57.1 

91 

47 

45 

20kg(9.1LB)

30

5THB

5TON

2kg

474

57.1

91

47

45

20kg

30

10000LB

5LB

9.1LB

Summary of Contents for CASTON II









Reviews: