CLEANING & MAINTENANCE
13
DRAINING AND CLEANING THE WATER TANK
•
Turn the power “off” and disconnect the air cooler from the
power supply.
•
Move the unit to a location where it can be drained. Remove
the cap from the water drain plug and allow the tank to empty
(see parts description on page 7).
•
After you have drained the water tank, please connect the water
drain plug to its original position.
•
Now refill the water tank up to Max level, wait for 5 min. and then
drain the entire water once again. Use clean water for this proce-
dure, so that maximum dust particles and remains are completely
removed.
•
If your cooler has not been used for a long duration, we advise
you to clean the water tank at least 2 times before it is used
again.
CLEANING THE FILTER AND HONEYCOMB
•
Turn off the unit, and unplug the power cord from wall outlet.
•
Rotate the unit facing the back panel, and locate the Rear Grill
Removal Screws (refer page 7., #15). Remove both the screws
with a screw driver.
•
Pull the rear grill panel upwards, until it is completely removed.
•
Now, the Honeycomb Media can be seen.
Clean the filter with a clean cloth to remove all the dust & dirt
particles.
•
Once the cleaning has been completed, assemble the unit as
described above.
•
Plug into the power supply and turn on unit.
Water Drain
Plug
Open Screws
Summary of Contents for EC48
Page 10: ...USE OPERATION CONTROL PANEL 8...
