CAS Corporation ER PLUS LCD, Service Manual

Page: 17 / 65

ER
PLUS
Service Manual
17 9/27/2010
2.1.6. Allocate Function Key Codes to Changeable keys (C-6)
(1) Under the calibration switch on and press [POWER] key.
(2) Move to C-6 Mode by pressing [ZERO] or [-] key and press [TARE] key to enter the mode.
(3) “E-SET” will be displayed on the weight window.
(4) Input “Soft Key Code” in the following table.
(5) Input the number ‘16’ as SOFT KEY CODE and then press ‘+’ key. That means, allocate
“add” function to “+” key.
(6) Press ‘C’ key to exit from “Input Soft Key Code” mode.
NOTE: User doesn’t need MATRIX KEY CODES to input soft key code, because MATRIX KEY
CODES are fixed in hardware.
* CHANGEABLE KEYS & SOFT KEY CODES
FUNCTION SOFT KEY CODES REMARK
“00” 11
ADD 16
FIXED ADD 17
SUM 18
PAY 19
PLU CALL 20
PLU SAVE 21
CANCLE 22
MODE 23
1/2 24
1/4 61 25 (in previous version)
PRE PACK 26
UNIT CHANGE (KG/LB) 27
DISPLAY TEST 28
HOLD 29
PRINT ENABLE 30
NO FUNCTION 31
EURO 60
PERCENT TARE 62
TARE SAVE 63
BOTH SAVE 64
PERCENT TARE SET 65
MUL ”X” 66