STARJET™ POOL WATER JET |
USER MANUAL
5
STEP 2
Unscrew the tank nut. Separate the flat washer and the tank gasket from the tank.
STEP 3
Unscrew the light from the tank. When reassembling, do not overtight the light.
Pull out the four diffusers. Take note of the filters order. Place them on a surface so you will
stack them back in the same order.
STEP 5
Rinse the diffusers and tank with a garden hose. Repeat the step backward to reassemble the
tank.
WINTERIZING
Water freezing and winter precipitation can damage some components of the StarJet. If you live
in an area where winter is cold, the StarJet must be removed from the pool and stored in a
sheltered room at a temperature above freezing. Water tubing needs to be purged.
STEP 1
Disconnect the 30 cm (12 inch) tubing from the StarJet.
STEP 2
Disconnected all the tubing from the manifold. Open the valve to drain the water.
STEP 3
Using a flat screwdriver, remove the StarJet screw cap.
STEP 4
Unscrew StarJet shell from the top ledge adaptor.
STEP 5
Disconnect the electric connection from StarGlow lights or from the Star Series Starter kit.
STEP 6
Remove and store all the StarJet units facing down.
STEP 7
For winter the 3-way valve and all the flow valve are in open position.
