background image

CARVIN

®

 STARFALL| USER MANUAL

2

INTRODUCTION

Thank you for purchasing the CARVIN

®

 STARFALL backlit waterfall set (‘’Product’’).

We want to help you get the best results from your new product and operate it 
safely. This manual contains information on how to do that; please read it carefully 
before installing and using the pool. If a problem should arise, or if you have any 
questions about your product, consult an authorized CARVIN

®

 retailer or distributor. 

All the information in this manual is based on the latest product information 
available at the time of publication. The manufacturer reserves the right to make 
changes at any time without notice and without incurring any obligation. No part of 
this publication may be reproduced without written permission. 

COMPLIANCE

The light included in this Product is compliant with applicable safety standards in 
Canada and in the United States of America.

READ AND FOLLOW 
ALL INSTRUCTIONS

Review all instructions provided with the product prior to its installation, startup, 
operation, shutdown, maintenance or winterization. 

Failure to follow warnings and safety messages may result in property damage 
or personal injury. The user assumes the bodily or material risks arising from any 
improper use of this product.

SAVE THESE INSTRUCTIONS

This manual should be considered a permanent part of the product and should 
remain with the product if resold. 

IMPORTANT SAFETY INSTRUCTIONS 

Your safety and the safety of others are very important. 

This manual provides important safety messages. A safety message alerts you to 

potential hazards that could hurt you or others. Each safety message is identified by 

a black box and one of three words, DANGER, WARNING, or CAUTION. 

SUPPORT

To obtain support for this product, visit carvinpool.com/support and refer to 
Consumer Information section of this manual.

TABLE OF CONTENTS

INTRODUCTION 2

INSTALLATION 3

TOOLS

 3

REQUIRED MATERIAL

 3

REQUIRED POOL EQUIPMENT

 3

IMPORTANT TO CONSIDER BEFORE INSTALLING

 3

STARFALL INSTALLATION STEPS 

3

WATER RETURN INSTALLATION STEPS 

5

FILLING THE POOL  

7

OPERATING 7

VACUUMING 7

WINTEREZING 7

REMPLACEMENT PARTS 

8

CONSUMER INFORMATION 

9

Warranty

 9

Replacement parts availability

 9

Replacement parts warranty

 9

Entire written warranty

 9

To Obtain warranty service
Technical support information

 9

Disclaimers

 9

Summary of Contents for STARFALL










Reviews: