7
Serial Number Label should not be removed. This label contains the serial number and manufacturing
information, and removal will void the products warranty.
8
Cooling Fans. Care should be taken to insure that the fans are always in proper working order
and that they are clean and free from any build up of dust or debris. Never place the amplifier in a
position that would block the free flow of fresh air from the fans. The direction of airflow is from the
rear to the front of the amplifier.
9
Input connectors. An XLR connector and a 1/4 TRS connector are provided for each channel.
Within a channel the XLR and TRS connectors are wired in parallel.
10
Threshold adjustment for the Signal Smart feature of the amplifier.
11
DIP Switches for selecting various features of the amplifier.
1
AC Mains Circuit Breaker will protect the amplifier against excessive current draw. Should
the breaker trip, wait, turn off the power switch, then press in to reset.
2
AC Mains Power Cord. Caution should be used to protect the power cord from damage to
prevent the possibility of electric shock.
3
Channel 2 Speakon connector. Used to connect speakers to Channel 2. Speaker wire
should be connected to Pin1+ and Pin1- within the mating connector.
4
Channel 2 Multi-way Binding post speaker connectors. Red is positive and Black is negative.
Take care to assure no frayed strands of wire are bridging
between the connectors. This can be simplified by not stripping an excessive amount of insulation
from the speaker wire.
5
Channel 1 Multi-way Binding post speaker connectors. Red is positive and Black is negative.
Take care to assure no frayed strands of wire are bridging between the connectors. This can
be simplified by not stripping an excessive amount of insulation from the speaker wire.
6
Channel 1 Speakon connector. Used to connect speakers to Channel 1. Speaker wire
should be connected to Pin1+ and Pin1- within the mating connector. Channel 1s Speakon
connector can be used to deliver the speaker level audio to a single speaker when the amplifier
is set to the MONO configuration.
See page 8 for more information
.
Rear Panel Controls and Features
1 2 3
4
5
6
7
8
9
10
8
11
R
R
R
6
Custom Manufactured In China
LPF 120
LP ON
HPF 80
HP ON
0.775
LVL
DUAL
OFF
LPF 120
LP ON
HPF 80
HP ON
0.775
LVL
2 CH
LIMIT
80
OFF
40
OFF
1.55
BYP
BRDG
LIMIT
80
OFF
40
OFF
1.55
BYP
MONO
OFF
CH 1
CH 2
-40dB
BYP
-20dB
SIGNAL
SMART
2+
3-
1
CH 2
+
-
+
-
BRIDGED
MONO
BRIDGED
MONO
FOR BRIDGED
OPERATION
CONSULT
USER MANUAL.
CLASS 2 WIRING MAY BE USED
FOR 2 CHANNEL OPERATION.
CLASS 1 WIRING MUST BE USED
FOR BRIDGED MONO OPERATION.
SERIAL NO.
WARRANTY VOID
IF REMOVED
CH 1
MODEL NO.
DO NOT
REMOVE
9300 North Decatur St.
Portland, OR 97203
AVERTISSEMENT
ENERGIE ELECTRIQUE
DANGEREUSE.
VOIR LA NOTICE
DE FONCTIONNEMENT.
L
L
WARNING
RISK OF HAZARDOUS
ENERGY! MAKE PROPER
SPEAKER CONNECTIONS.
CONSU T USER MANUA
All manuals and user guides at all-guides.com
all-guides.com