Carver Yachts 36 SEDAN, Owner'S Manual, Page: 53 / 135

3428 • 3/06 41
AC ELECTRICAL SYSTEM SECTION 3
Testing GFCI Receptacles
The GFCI receptacles are identified by Test and Reset buttons located between
the receptacles’ two outlets.
Test each GFCI receptacle once every week:
1. Press the Test button. If the GFCI is operating normally, this cuts the power
supply to the GFCI receptacle and to all other receptacles on that circuit.
If the GFCI receptacle or any other receptacle on that circuit still has
power after the Test button is pressed, do not use any of the receptacles
on that circuit. Contact a qualified electrician to make the appropriate
repairs.
2. Plug a lamp or other AC powered device into the GFCI receptacle and turn
on the device. The device should not operate.
3. Repeat Step 2 for each receptacle on the same circuit as the GFCI receptacle.
4. Press the Reset button to restore power to the GFCI receptacle and to all
other receptacles on that circuit.
GFCI RECEPTACLE LOCATIONS