Cartoni P90, User Manual/Maintenance

Page: 5 / 28

5
1.2 W
arranty
The P90 Pedestal is covered by a warranty against manufacturing defects for 5 years from the date of
shipment (three years basic wa two years upon online registration to www.cartoni.com).
The warranty covers replacement of any defective part and the labour required excluding transport/duty costs.
In the case of replacement of single parts, these can be supplied free of charge by CARTONI but the
owner will bear the cost of transport/duty charges for the parts.
The warranty is only valid if the Pedestal has been used properly as outlined in the manufacturer’s instruc-
tions and has not been exposed to any mishandling. The warranty will be immediately invalid if modifica-
tions and/or repairs are carried out by unauthorized persons otherwise authorized by
CARTONI .
Components subject to wear and tear are not covered by the warranty.
The warranty is also invalidated by one of the following events:
• Failure to comply with payment conditions;
• Failure to carry out appropriate maintenance;
• Removal or mistreatment of marks and/or labels containing data and technical specification.
CARTONI accepts no responsibility for damage to the Pedestal caused by improper use or the malfunc-
tion of other equipment connected to the Camera support.
In any case, the warranty only covers Pedestal damage and/or malfunctions and does not entitle the
purchaser/owner to claim any damages for loss of production time due to assumed or proven damage
caused by and/or connected to the Pedestal itself.
1.3 a
uthorIzed Personnel
Extraordinary maintenance and repairs to the machine can only be carried out by competent persons
who are either employed, trained or authorized by
CARTONI in writing.
Any information regarding repair/maintenance service stations can be obtained from CARTONI .
1.4 r
egulatory InformatIon
The design and construction of the Pedestal by CARTONI complies with the regulations listed below:
• UNI EN ISO 12100 (2010) Safety of machinery - General principles for design – Risk assesment
and risk reduction.
• Directive 2006/42/CE Covering the harmonization of member States’ laws on machinery.
• Presidential Decree 17/2010 of 27/01/2010: Regulation implementing EU directive 2006/42/
CE and subsequent amendments.
Additional technical standards relating to specific safety measures as the UNI EN ISO 13857:2015 con-
cerning safety distance and the UNI EN ISO 13850:2015 concerning the emergency machine stop have
been considered.