CONTROL PANEL LAYOUT
On/Off Toggle
Switches
Controllers
aux
6
CAUTION:
HOT SURFACE
Inner surfaces of the unit
will be very hot during and
after operation. Avoid
touching the cabinet when
loading or removing
product.
1. Turn the power switches ON and let cabinet preheat for 30
minutes. When the cabinet is turned on, the air heater will oper-
ate until the cabinet reaches the air temperature setpoint. Each
display will read the actual temperature.
The temp icon will be illuminated when the cabinet temperature
is below the air temperature setpoint.
2. To view the temperature setpoint, press and release the SET
key.
3. After preheat, load cabinet with food product. Food is held in
various pan sizes as indicated by the spacing of the wire racks
inside the cabinet.
4. When cabinet is not in use, turn power off.
5. Cabinet must be cleaned daily. See cleaning instructions on
page 8.
OPERATION
AUX Key
(inoperable)
Set Key
Press and release
to display temper-
ature set point
Up Arrow Key
Press to increase temperature set point
(1
°
increments)
Down Arrow Key
Press to decrease temperature set point
(1
°
increments)
Digital Display
Readout
EVOR208
