Page 19 of 25
LED will start rapid flashing.
•
After a round of rapid flashing release the on/off
button.
•
Disconnect the USB cable and press the “Parking
Brake” button on the remote.
•
Press the On/Off button to get a solid green LED on
caddy.
•
Test all remote buttons.
TROUBLE SHOOTING GUIDE
My caddy will not show any indicator LED on the caddy handle.
1.
Ensure Caddy Battery is plugged into the Caddy
receptacle.
2.
Have a full charge on Caddy Battery. After 3 -‐ 5 hours, the
battery charger LED will turn GREEN.
3.
If problem persists, call Cart Tek for Technical Support.
My caddy will not show a solid green indicator LED on the caddy
handle.
1.
Make sure you can get a flashing green indicator LED first.
2.
Press and hold the On/off button for 3 seconds
3.
If problem persists, call Cart Tek for Technical Support.
My caddy is turned on (solid green LED), but my remote will not
work.
1.
Make sure the on/off switch is in the on position on the
remote control transmitter.
2.
Try restarting the caddy by disconnecting the battery for
5 seconds, then powering the caddy back on. Test remote
again.
