background image

Page   16   of   25   

QUICK   TIP   

   

YOUR   GRX-­‐1250   LI   CADDY   CART   

The   caddy   electronics   may   be   customized   for   your   personal   
preferences.      All   programing   customization   is   done   via   the   
remote   transmitter.      Using   “Program   Mode”   you   can   adjust   the   

electronics   to:   

 

Adjust   Turning   Force.      Depending   on   your   course,   flatter   
golf   courses   require   less   turning   force   that   hilly   or   
undulated   golf   courses.      

 

Tracking   issues.      If   a   caddy   veers   off   to   one   side.      Read   all   
tracking   information   under   Precautions   page   6   and   
Trouble   Shooting   page   19   before   using   electronic   tracking   
adjustment.   

 

Reset   Caddy   back   to   original   Factory   Settings.      This   is   
useful   if   your   caddy   accidently   gets   programed   or   you   
program   it   and   you   do   not   like   the   new   settings.   

For   the   instructions   below   that   say   “go   into   program   mode”,   
follow   these   instructions;      

On   your   remote   transmitter,      “Press   the   parking   brake   button.         

When   first   using   your   caddy,   practice   in   a   large   open   area.         
Take   the   time   to   practice   the   difference   between   a   single   
touch   of   a   key   and   a   prolonged   push   especially   with   left   and   
right   functions.   Also   get   comfortable   with   the   coast   and   
parking   brake   buttons.   Practice   turning   the   caddy   
perpendicular   to   hills   when   parking   on   an   incline.      
   

Summary of Contents for GRX-1250Li


























Reviews:

Related manuals for GRX-1250Li