G
38
CARSON X8E Chassis 500409015 / 500409016
Hold the set key,
switch on the ESC
ca. 8 seconds
for 1 time
for 2 times
for 3 times
for 4 times
for 5 times
Enter the 1st adjustment
“Running Mode”
Enter the
2nd adjustment
“Drag Brake Force” in
neutral position
Enter the
3rd adjustment
Enter the
4th adjustment
“Accelleration mode”
Enter the 5th adjustment
„Max. braking force”
“Forward with brake”
“Forward/reverse with brake”
“Forward and reverse”
“deactivated”
Enter the corresponding
programmable adjustment, the
the times present the current
value of this item.
Press the SET key to choose
the programmable value, the
times, the times present the
serial number of the value
you are choosing.
✼
= 1 sec
✼
= 3 sec
Attention
Value
Blinking
frequency
1
✼
2
✼ ✼
3
✼ ✼ ✼
4
✼ ✼ ✼ ✼
5
✼ ✼ ✼ ✼ ✼
6
✼
+
✼
7
✼
+
✼ ✼
8
✼
+
✼ ✼ ✼
Release
SET key
Hold SET key for 3 seconds
Press
SET key
Hold on the button
Hold on the button
Release
SET key
Hold SET key for 3 seconds
Press
SET key
Release
SET key
Hold SET key for 3 seconds
Press
SET key
Release
SET key
Press
SET key
Release
SET key
Press
SET key
4S – Program the ESC with the Set Button
The following is a flowchart sample for pro-
gramming the Dragster S6 controller.
Note:
In the program process, when the LED is flashing, the motor will emit
“Beep” tone at the same time.
More selection see table on page 36.
