SETTING UP TRIPOD:
1. Flip open leg locks and extend legs to desired
height. Close leg locks to lock in place.
2. Loosen center column locking collar. Spread tripod
legs to desired width. Tighten collar to lock in place.
Note: To make sure tripod is level, the bubble level
(located on panhead) should appear centered inside
red circle when level. Adjust leg height as needed
to level tripod.
Center Column
Locking Collar
ATTACHING OPTIC:
6TJOH:PVS5SJQPE
1. Pull back plate locking lever
2. Insert mounting screw into thread on
3. Reattach quick release plate to
to remove quick release plate.
optic and turn wingnut (located on
tripod head. Press down plate and
underside of quick release plate)
lever will shift into place and lock.
clockwise until tight. This will secure
optic to plate.
53POMZ
MPPTFO
DPVOUFSDMPDLXJTF5VSOUJMUQBOIBOEMF
SJHIUPSMFGUBTEFTJSFE3FUJHIUFOLOPC
UPMPDLJOQMBDF
2
