Carson SA-430 Installation And Operating Instructions Manual Download Page 13

SA-430 Installation and Operating Instructions Page 13 
 

 
03/22/02 CP4854B 
 

PARTS 

The following parts are available from Carson Manufacturing Company, Inc.: 

Part

 

Description

 

CP3633 

Bracket, Microphone with Screws 

CP4732 

Control, 1K Vertical Trimmer 

CP4834 

Control, 1K Ohm Vertical Mini-Pot 

CP4833-10 

Connector, 10-pin Removable Pressure W/Locking Screws 

ATO/ATC 20A  Fuse, 20 Amp Automotive 
PS70BL-D 

Knob, Selector Switch Knob 

G-100-2L 

Knob, Volume Control 

CP4840 

Label, SA-430 Front Panel 

CP3040 

Lead Asmb, Control Head Cable 

CP4854 

Manual, SA-430-10F Instruction 

CP4750 

Microphone, Noise Canceling W/Connector 

8025 DRS/CAP  Nut, 1/4-40 Dress W/Cap, Red 
SR-15-1 

Strain Relief, Microphone 

8121D2V40 

Switch, Momentary Push Button, Vertical 

7101-T-C-Q 

Switch, Power Toggle 

CP3599 

Switch, Rotary 6-Pos. Selector, Vertical 

CP4119 

Transistor, TIP36C Power 

RETURN 

If you have any questions concerning this or any other Carson product, please contact our 

Technical Service Department

 at (888) 577-6877.  Many issues can be handled over the 

phone.  We can also be reached via e-mail at 

[email protected] 

 
If a product must be returned for any reason, please contact our Technical Service 
Department to obtain a Returned Merchandise Authorization number (RMA#) before you ship 
the product to Carson.  Please write the RMA# clearly on the package near the mailing label.  
Be sure to provide a return address, contact and phone number, along with a brief description 
of the problem. 

Summary of Contents for SA-430
















Reviews: