background image

 

Before You Start 

Important Notice

 

 

Carefully read the entire manual before operating.

 

 

Make sure the source device is correct and functioning.

 

 

Equal capacity of source and target is recommended for guaranteed data 
consistency.

 

 

Using the Copy+Compare function provides the most flawless duplication.

 

 

Damage incurred due to noncompliance with U-Reach operating instructions 
will void the warranty.

 

 

Store the equipment safely when not in use and keep out of the reach of 
children.

 

 

Please turn off duplicator before replacing a socket.

 

 

Never turn off the power while the firmware is updating. 

 

 

Use only approved, stable power sources.

 

 

Use product only in a clean, dry, dust-free, and ventilated area. Liquids or 
foreign debris can severely damage your duplicator.

 

 

It is typical for the machine to heat up during operation.

 

 

While in use, do not move the duplicator or remove HDDs.

 

 

Static electricity may cause duplication error. Please pay attention to the 
duplicator’s environment and operator’s equipment. Purchasing static 
electricity elimination equipment to avoid static electricity shock while in 
high static electricity areas.

 

 

Notice Symbols 

Special items, procedures, or notes should be noticed by users before operation.

 

 

Note 

Refers to related duplicator operations, special details, tips, or suggestions for 
operational effectiveness. 

 

Caution 

Refers to procedures that need to be adhered to or precautions.

 

Summary of Contents for Pro118






















Reviews: