Carromco 92446SPA, Manual Instruction

Page: 6 / 128

4
8. Single Rings (x 1) 21. Soft Tip
9. NEXT Button 22. Barrel
10. Sound on/off 23. Flight & Shaft
11. Handicap Button 24. Screw 2x
12. Miss Button 25. Adapter
4,5V, 500mA
13. ON/OFF Button 26. Plug
MOUNTING INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY:
Screwdriver and drill - (not included)
1. Preparing the darts: Screw the point (tip) and shaft into the grip (barrel). If extra
flights, bend the flight into shape and put it into the shaft.
2. Suspend the dartboard by means of the two mounting holes in the back. 2
screws are provided for mounting on the wall. Should the screws not be suitable
for your wall, change them for suitable screws. There needs to be a power
socket nearby. According to international dart match rules, the dartboard should
be suspended in such a way that the height from the floor to the center of the
dart circle is 1.73 m (68”) and the distance from the throwing line to the board is
2.37 (7 feet 9 1/4 inches).
3. Place two marks side-by-
side of the selected wall studs 192cm (75 5/8”) above
the floor, with 14 cm between them. Screw two screws into the reference marks
until the screw heads are protruding about 13mm (1/2’) from the wall.
4. Line up the mounting holes on the back of the game with the screw heads, then
mount the game. It may be necessary to adjust the screws until the board fits
snugly against the wall.The adapter must have 230V, AC
– 4,5V DC, 500mA.
Center of the
Dartboard (Bull’s Eye)
Wall
Throwing line
237 cm