6
Thermometer:
z
Press “-(°C / °F)” button to select Indoor/Outdoor Temperature in Celsius mode/
Fahrenheit mode.
Outdoor Thermo Sensor Unit Registration Procedure:
z
The weather station automatically starts receiving transmission from Outdoor
Thermo Sensor for outdoor temperature after new batteries are inserted.
z
The sensor will automatically transmit temperature to the weather station after
batteries inserted. Batteries compartment of thermo sensor is locating behind the
back cover, unscrews to open.
z
For having more than one external transmitter (Maximum3), select the Channel,
CH1, CH2 or CH3 to ensure each sensor is transmitting difference channel before
inserting batteries. The channel select switch is at the back of the thermo sensor.
z
Press “ TX “ button on the thermo sensor unit to transmit temperature to the
weather station manually. The weather station gives a “beep” sound if it received
the temperature.
Display outdoor temperature :
z
Press “ CHANNEL” button to view the 3 Channels’ temperature. The sequence is
shown as follow:
Press
Press
Press
“CHANNEL” button
“CHANNEL” button “CHANNEL” button
Display the three
channels alternatively
z
Hold “ CHANNEL” button for 3 seconds to cancel unused channel manually. It
will automatically register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel ( “
- - . –“
is displayed on
the LCD ), press “CHANNEL” button for 3 seconds to cancel that channel and
receive the channel again.
z
The trend pointer displayed on the LCD indicates the trend of the outdoor
temperature.
“
” indicates the outdoor temperature is increasing.
“
” indicates the outdoor temperature is steady.
