Functional description
2
8.
Up-and-down SWING Angle
Each time you press the button
, Remote control
display will follow the sequence:
HEAT MODE:
Other modes:
9.
Right-and-left SWING Angle adjustment
Each time you press the button
, the remote
control will display the following cycle:
10.
Round-way cassette swing angle adjustment
Each time you press the button, remote control will display
the following sequence
:
Press
button to select the blade and the selected
blade will flash. Press “Up-and-down Angle” button to
adjust the airflow angle of the selected blade.
11. SLEEP
Press the
button, and the remote controller screen
will display “Sleep”. The SLEEP time is fixed to 8 hours and
is not adjustable. Press the
button again, to cancel
the sleep function.
Note:
(1) Sleep function is invalid in FAN mode.
(2) Sleep function is only valid when the unit is turned on.
12. HEALTH
(1) When the controller is switched on, press
button,
to activate and display ”HEALTH” icon on the LCD display.
(2) When the controller is turned off, press the
button to
enter the FAN mode, start low wind and display ”HEALTH” icon.
(3) If Health function is set and activated, Press Health
button to cancel and stay in HEALTH mode.
13. Health AIRFLOW
Press the
button and the remote controller screen
displays ”AIRFLOW “.
Press
again to cancel this function.
14. HEATER
Press the
button, and the remote controller will
display ”HEATER”.
Press
button again, the ”HEATER” on the remote control
-
ler will disappear, and the HEATER function will be turned off.
Note : Heater function is only valid in AUTO and HEAT mode.
15. LIGHT
Press the
button to activate the light function.
Press the
button again, and the light function is turned off.
16. CLOCK
Press the
button, the time displayed on the remote
controller flashes before the clock adjustment.
Press the button once again to increase or decrease the
time by one minute. Holding the button will quickly increase
or decrease the time.
To complete the set time, press
button again
to confirm.
17.TIMER
(1) When the controller is on, you can only set the TIMER OFF.
And when the controller is off, you can only set the TIMER ON.
When the remote controller is off, press the
button to
adjust TIMER ON.
When the remote controller is on, press the
button
to adjust TIMER OFF. When entering the timing adjustment
process, if the timer ON/ OFF icon and clock flash at the
same time, the initial default value is:12:00. Press the
button to increase or decrease the timeby 1 minute, pressing
and holding the button will speed up the adjustment.
After the time adjustment is completed, press the
button again to confirm. Then the time will statically display,
and start the countdown.
18. MENU
Press the
button, Functional cycle is as follows :
TURBO →FRESH→IFP AC OFF→IFP AC ECO→3D AIR
(reserved)→
→10°C heating (Only valid in HEAT
mode)→°F/ °C→TURBO
1. Press
button, the current function to be set flashes;
2. Press
button again to set/ cancel the current setting
function in the above sequence. If there is no operation in 5
seconds, it will automatically exit.
19. Wi-Fi Configuration
Press
button for 3s to enter Wi-Fi configuration, remote
controller displays COOL mode, LOW fan speed and 30°C.
Or you can enter the Wi-Fi configuration through the setting
in Cooling mode, Low fan speed and 30°C.
20. SELF-CLEAN
Press the combined button
and
, and the
remote controller will display ”SELF-CLEAN”.
Press
button or
button to exit the
self-cleaning function.
Note: The “SELF-CLEAN” function is invalid under “SLEEP”
function and “TIMER” function.
21. LOCK
Press the combination key button
and
, and
the remote controller screen will display ”
“. All buttons on
the remote control become invalid.
Press the combination button
and
again to
cancel the lock, the icon ”
“ will disappear and all buttons
on the controller will become valid.
