7
1. Select the desidered zone with
key or virtual zoning
function.
2
Press and hold the comfort button
(
or
or
) to be changed for about five
seconds. The set temperature, and the symbol heat (
)
or cool (
) or domestic water ( ) will flash.
3
Press the mode ( ) button to switch between heat (
),
cool (
) and sanitary ( ) (depend on access level).
4
Press the up or down button to set the desired
temperature set point for the selected mode. The
triangle icon ( ) above the pressed comfort button
(
) will start flashing.
5
Press again the up or down button to set the new
desired temperature setting for the next setting.
6
Pressing one of the other "home", "sleep", "away"
button, and replay step 4 to 5.
7
Press OK button to confirm changes and to exit from
the Comfort change mode.
8
If needed select a different zone and repeat steps 1.
Programming the user interface
"Home" "sleep" "away" settings
The factory setting are show above
Touch ‘N’ Go Option
Heat
Cool
Domestic hot water
Home
20° C
24° C
60° C
Away
15° C
28° C
50° C
Sleep
18° C
26° C
Not available
Schedule settings
The schedule works on 4 different periods, called P1, P2, P3,
P4. Each zone has its own schedule. Using master board is
possible to set the schedule for sanitary and system.
The thermostat has preset settings (see below), but you can
change these.
Using the "virtual zone" feature (only for access level 3 and
master board) , it's possible to change the schedules of all
the zones in the installation.
English
129H84_GB_8.indd 7
23/07/12 16.29
Summary of Contents for User interface Comfort Module Series
Page 1: ...User interface Comfort Module Series User and Installation Manual ...
Page 106: ......
Page 107: ......
