background image

Advanced Setup

Page 13

Step #              Description                                            Range         Factory Default

1            Time of day clock set                                   24 hour            12:00 Am  
2            Display Type Dual (2) or Single (1)                 1-2                       2
3            Programmable On or Off                              Off / On                 On
4            Heat Pump                                                   Off / On                 Off
5            Reversing Valve polarity                                O / B                     O
6            Electric Heat                                                 Off / On                 Off
7            Deadband or Temperature swing                    1 - 6                     2
8            Forced minimum difference heat/cool             0 - 6                     2
9            Cycles per hour                                          d, d1, 2 - 6                6
10          
11           
         
          

Thermoglow backlight                                   Off / On                 On

Fahrenheit or Centigrade                                 F / C                   F

Advanced Setup Table

Summary of Contents for TSTATCCPB101



















Reviews: