EASY TO
SET
Trip Start
SETPOINT
BOX TEMPERATURE
START/RUN
STOP
1
0
STANDBY
ENGINE
LANGUAGE
CONTINUOUS
RUN
START-STOP
ALARM
DEFROST
COOL
HEAT
MANUAL
DEFROST
ALARM LIST
START-STOP
CONTINUOUS
SELECT
=
!
TRIP
START
EASY TO
CHECK
Alarm Display / Reset
SETPOINT
BOX TEMPERATURE
START/RUN
STOP
1
0
STANDBY
ENGINE
LANGUAGE
CONTINUOUS
RUN
START-STOP
ALARM
DEFROST
COOL
HEAT
MANUAL
DEFROST
ALARM LIST
START-STOP
CONTINUOUS
SELECT
=
!
Press the ALARM LIST key. If there are no active
alarms in the alarm list, the display will say “NO
ACTIVE ALARMS” for 5 seconds.
Press the ALARM LIST key to scroll through the list
of alarms.
If there are active alarms in the alarm list, the
display will be “A” and the alarm message for the
latest active alarm in the list for 5 seconds.
2
2
3
3
When you reach the end of the alarm list, “LIST
END, = TO CLEAR ALARMS” is displayed.
4
4
To deactivate the active alarm list, press the = key
while “LIST END, = TO CLEAR ALARMS” is being
displayed.
5
5
To mark the start of a trip in the data
recorder, press the SELECT key until
TRIP START is lit.
If trip start is acknowledged by the data recorder,
“TRIP START ENTERED” will be displayed for 5
seconds and then the display will revert back to the
normal display. Otherwise “CANNOT ENTER TRIP
START” will flash and then the display will revert
back to the normal display.
Press the = key.
1
1
2
2
3
3
TRIP START ENTERED
1
1
NO ACTIVE ALARMS
