background image

EASY TO 

STOP

Stopping

SETPOINT

BOX TEMPERATURE

START/RUN

STOP

1

0

STANDBY

ENGINE

LANGUAGE

CONTINUOUS

RUN

START-STOP

ALARM

DEFROST

COOL

HEAT

MANUAL

DEFROST

ALARM LIST

START-STOP

CONTINUOUS

SELECT

=

!

TRIP

START

FUNCTION

CHANGE

DATA

PRETRIP

Place RUN / STOP switch to STOP to stop
unit.

1

1

FOR YOUR

PROTECTION 

Safety

Your  CARRIER product has been designed to meet all
European Safety requirements.

Please take notice of all stickers that have been placed on
this product for your safety. They are for your PROTECTION !

Beware of HIGH VOLTAGE (up to 700V) supplied by the
generator as the unit may start automatically. Before servi-
cing unit, make sure the RUN/STOP switch is in STOP position
and disconnect the negative battery cable.

Pacemaker holders must stay clear of the unit while operating
as the power generator supplies HIGH VOLTAGE.

Never dis-assemble the generator 
HIGH MAGNETIC FIELD INSIDE.

The refrigerant contained in the refrigeration system
of your unit can cause frosbite, severe burns, or blind-
ness when in direct contact with the skin or eyes.

Replace cover after servicing battery to insure protection of
battery and terminals.

Disconnect battery before doing any electrical welding on unit or
trailer. This unit has a negative ground system. Do not reverse polarity.
Reverse polarity will cause immediate failure of electrical system.

Top up coolant into recovery bottle only.
Fill empty radiator through filler neck slowly to avoid air
entrapment.
Remove filler cap slowly.

Unit may start automatically.

Beware of fan blades and pulleys.

Beware of electric heaters.

Summary of Contents for Transicold Vector









Reviews: