Carrier PREMIERLINK 33CSPREMLK Installation And Configuration Manual Download

Page: 32 / 44

DURATION — The Duration field indicates how long the
holiday will last (in days).
Duration:

Range:

0 to 365

Default Value:

As an example, if a Holiday is configured for Month 2,

Day 5, Duration 2, then the Holiday will start February 5 and
end February 7.

Table 11 — Holiday Configuration

Occupancy Configuration Screen —

The Occu-

pancy Configuration Screen is used to configure the occupancy
schedule for the PremierLink™ controller. See Table 12.
MANUAL OVERRIDE HOURS — The Manual Override
Hours point is used to command a timed override by entering
the number of hours the override will be in effect. If the occu-
pancy schedule is occupied when this number is downloaded,
the current occupancy period will be extended by the number
of hours downloaded.

If the current occupancy period is unoccupied when the

occupancy override is initiated, the mode will change to occu-
pied for the duration of the number of hours downloaded. If the
occupancy override is due to end after the start of the next
occupancy period, the mode will transition from occupancy
override to occupied without becoming unoccupied and the
occupancy override timer will be reset.

An active occupancy override or a pending occupancy

override may be canceled by downloading a zero to this
configuration. Once a number other than zero has been down-
loaded to this configuration, any subsequent downloads of any
value other than zero will be ignored by the controller.
Manual Override
Hours: Units:

Hours

Range:

0 to 4

Default Value:

OCCUPANCY SCHEDULE — For flexibility of scheduling,
the occupancy programming is broken into eight separate peri-
ods. For each period the schedule contains the following fields:
Day of Week, Occupied From, and Occupied To.

DAY OF WEEK — The Day of Week configuration consists
of eight fields corresponding to the seven days of the week and
a holiday field in the following order: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday, Sunday, Holiday.

It is displayed as:

M T W Th Fr Sa Su Hol
0 0 0 0 0 0 0 0

If a 1 is configured in the corresponding place for a certain

day of the week, the related “Occupied from” and “Occupied
to” times for that period will take effect on that day of the
week. If a 1 is placed in the holiday field, the related times will
take effect on a day configured as a holiday. A zero means the
schedule period will not apply to that day.
Day of week:

Range:

0 or 1

Default Values:

11111111 for period 1,
00000000 for the rest of
the periods

OCCUPIED FROM — This field is used to configure the
hour and minute, in military time, that the mode for the
PremierLink controller will switch to occupied.
Occupied From:

Units:

Hours:Minutes

Range:

00:00 to 24:00
(Minutes 00 to 59)

Default Value:

00:00

OCCUPIED TO — This field is used to configure the hour
and minute, in military time, that the mode for the PremierLink
controller switches from occupied to unoccupied.
Occupied To:

Units:

Hours:Minutes

Range:

00:00 to 24:00
(Minutes 00 to 59)

Default Value:

24:00

Table 12 — Occupancy Configuration

Set Point Screen —

The Set Point screen is used to con-

figure the occupied and unoccupied set points. See Table 13.
OCCUPIED LOW — The Occupied Low set point describes
the low temperature limit of the space during Occupied mode.
Occupied Low:

Units:

Degrees F (Degrees C)

Range:

40.0 to 90.0

Default Value:

70.0

OCCUPIED HIGH — The Occupied High set point describes
the high temperature limit of the space during Occupied mode.
Occupied High:

Units:

Degrees F (Degrees C)

Range:

45.0 to 99.9

Default Value: