background image

GB-3

CAUTION

This symbol indicates the possibility of property damage or serious consequences.

This product is intended for human comfort ONLY.
Do not block air inlets or outlets. Poor performance, increased running costs and reduce product 
life will result.
Do not place the unit in front of drapes, curtains or other hangings.

In case they fall against the air inlet.

The unit should be used in such a way that it is protected from moisture. Do not place any objects
on top of unit, especially the one containing water.
Do not control the system with main power switch.

It can cause fire or water leakage. 

Store the remote control out of reach of infants.

Failure to observe this may result in the batteries being swallowed or other accidents.

Always transport the unit in a vertical position.
Ensure the unit is securely placed on a stable, level surface.
Disconnect the unit when unused for long periods. Place and store away from direct sunlight.
Disconnect BEFORE cleaning or servicing.

This may result in electric shock.

Do not wet the housing or control panel or never use strong detergents, solvents or abrasive 
polish on the product.
Never remove any fixed cover.
Regular high level maintenance of the units is essential. 

Specialist MAINTENANCE is required to do deep-clean, lubricate and function check of all critical components. Contact a 
suitable service provider.

1. SAFETY PRECAUTIONS

This product contains fluorinated gases covered by the Kyoto Protocol 

Chemical Name of Gas

Global Warming Potential (GWP) of Gas

R410A

2088

CAUTION

1. Clearly write the charged refrigerant quantity on the
    refrigerant label using indelible ink.
2. Prevent emission of the contained fluorinated gas. Ensure
    that the fluorinated gas is never vented to the atmosphere
    during installation, service or disposal. When any leakage 
    of the contained fluorinated gas is detected, the leak shall
    be stopped and repaired as soon as possible.

3. Only qualified service personnel are allowed to access and 
    service this product.
4. Any handling of the fluorinated gas in this product, such as
    when moving the product or recharging the gas, shall comply
    under (EC) Regulation No. 842/2006 on certain fluorinated 
    greenhouse gases and any relevant local legislation.
5. Contact dealers, installers, etc., for any questions.

Summary of Contents for PC-09HPPD PD Portable

















Reviews: