Carrier P/N 33CSSN2-MH, Owner'S Manual, Page: 8 / 11

Advanced Setup
II
(continued)
Page 7
INSTALLATION
Press
To exit setup
screens:
F / C
Continued from prior page.
Press
FAN
Default = 30 seconds
Adjust the length of time
the fan will continue to
run after the temperature
is satisfied. (To purge
the system)
(0-90 seconds, in 15
second increments)
FAN PURGE
30
TO SET PRESS, OR
Select the type of equipment
this thermostat is connected
to, from the table on the
next page.
EQUIPMENT TYPE #
i
TO SET PRESS, OR
Adjust the maximum
temperature setpoint
that is used when the
thermostat indicates
OFF .
Cooling will come on when
the temperature rises
above this setpoint.
Default = 85 degrees
OFF MAX SETPOINT
85
TO SET PRESS, OR
Press
FAN
This feature prevents rooms from getting to hot or too cold
when heating or cooling is turned off.