background image

Operation and Maintenance Manual

A210012GEN

Fig. 1 – FN1AAF

Features

• 99.97% efficient long-life HEPA filter removes particles as small as

0.3 microns

• Standard MERV 7 or higher pre-filter
• Minimum 200 CFM and Maximum 1500 CFM
• Meets or exceeds ASHRAE Standard 170: Ventilation of Health Care

Facilities

• Vertical design for smaller footprint compared to many competitors,

and can be mounted and operated horizontally when necessary

• Portable and adaptable to nearly any location
• Heavy duty locking casters for easy and smooth transport
• HEPA filter rack and sealing design meet air leakage requirement
• Red  lighted  indicator  to  alert  user  when  filters  are  overloaded

(generally means pre-filter requires replacement)

• Green ON/OFF switch illuminates to verify when running
• Speed selector switch on 006 & 015 sizes for various air flow ranges
• 115V operation. 10-foot long power cord with strain relief
• Galvanized steel, pre-painted cabinet is fully insulated
• Exhaust transition plate to standard 10-inch round (005/006 size) or

12-inch oval (015 size) duct included

• UL® Listed
• One year limited warranty

UL and the UL logo are trademarks of UL LLC.

A Note About Safety

Any time you see this symbol   in manuals, instructions and on the

unit, be aware of the potential for personal injury. All equipment should

be installed in accordance with accepted practices and unit Installation

Instructions, and in compliance with all national and local codes. Power

should be turned off when servicing or repairing electrical components.

Extreme  caution  should  be  observed  when  troubleshooting  electrical

components  with  power  on.  Observe  all  warning  notices  posted  on

equipment and in instructions or manuals.

FN1AAF

OptiClean™ Air Scrubber and Negative Air Machine

NOTICE

!

IMPORTANT INFORMATION

Read all instructions and data in this manual before operating. DO NOT

apply power or turn on until the outer packaging (plus the inside located

parts box and cardboard under the filters) have been removed from the

unit.  See  applicable  “Assemble  the  Unit”  Instructions  herein.

Additional  information and  video assembly instructions  are  available

online at opticlean.carrier.com.

CAUTION

!

CUT HAZARD

Failure to follow this caution may result in personal injury.
Sheet metal parts may have sharp edges or burrs. Use care and wear

appropriate  protective  clothing,  safety  glasses  and  gloves  when

servicing, and when handling parts.

WARNING

!

PERSONAL INJURY / PROPERTY DAMAGE HAZARD 

Failure  to  follow  this  warning  could  result  in  personal  injury  or

property damage.

Improper installation, adjustment, alteration,  service, maintenance, or

use can cause conditions which may cause personal injury or property

damage. Consult a qualified installer or your distributor for information

or assistance. Read and follow all instructions and warnings, including

labels shipped with or attached to unit before operating.

WARNING

!

ELECTRICAL SHOCK HAZARD

Failure to follow this warning could result in personal injury or death.

Disconnect  all  electrical  power  to  the  unit  before  removing  access

panels to perform any maintenance.

WARNING

!

PORTABLE UNIT AND METAL SHARP EDGES 

HAZARD

Failure to follow this Warning could cause personal injury or death.

This unit must be used in a location where unsupervised children are

not allowed to play. The unit is portable, and areas inside and under the

unit  could  cause  personal  injury.  If  the  unit  is  used  in  a  horizontal

configuration,  physical  barriers  must  be  installed  around  the  unit  to

prevent unauthorized access.

NOTICE

!

CALIFORNIA USERS

When  this  equipment  is  used  in  the  state  of  California,  it  must  be

anchored or affixed in such a way that the unit is not mobile.

Summary of Contents for OptiClean FN1AAF









Reviews: