![background image](http://html1.mh-extra.com/html/carrier/opn-mtcc/opn-mtcc_installation-and-start-up-instructions-manual_2562501006.webp)
6
Fig. 7 —Technician Tool
4.
Once you complete the upload, you should see the programs numbered 1 through 64.
Fig. 8 —Technician Tool
5.
To verify communications, select the “
System Info
” program
Properties
Network Points
and check for the message ()
No Error
in the
Error
column. This program displays the status of the Modbus registers that reside in the TCC-Link. All Toshiba Carrier Unit X programs have
points that reside only in the Controllers and are sent to the TCC-Link when requested. Use the
System Info
tab to get the values from the
Toshiba Carrier VRF System to verify that the i-Vu Open Link is communicating with the TCC-Link.
Summary of Contents for OPN-MTCC
Page 7: ...7 Fig 9 Technician Tool ...