Carrier Miracool 1300L, Owner'S Manual

Page: 15 / 16

15
TABLE 4 — METHODS FOR CLEANING STAINLESS STEEL
*Use of brand names is intended only to indicate a type of cleaner and
does not constitute an endorsement; nor does the omission of any
brand name cleaner imply its inadequacy. Many products named are
regional in distribution and can be found in local supermarkets, depart-
ment and hardware stores.
†All products should be used in strict accordance with instructions on
package.
NOTE S :
1. Use the mildest cleaning procedure that will do the job efficiently and
effectively.
2. Always rub in the direction of polish lines for maximum effectiveness
and to avoid marring the surface.
3. Use only a soft cloth, sponge, fiberous brushes, plastic or stainless
steel pads for cleaning and scouring.
4. Rinse thoroughly with fresh water after every cleaning operation.
5. Always wipe dry to avoid water marks.
6.
Never use common steel wool pads; these will cause rust!
TASK CLEANING AGENT*
METHOD OF
APPLICATION†
EFFECT ON FINISH
Routine Cleaning S oap, ammonia or detergent and
water
S ponge with cloth, then rinse with
clear water and wipe dry.
S atisfactory for use on all finishes.
Stubborn Spots and Stains,
Caked-on Splatter, and other
Light Discolorations Revere Ware, Goddard’s, Twinkle,
or Cameo stainless steel cleaner or
S oft S crub cleaner
Apply with damp sponge or cloth.
Rub with damp cloth. S atisfactory for use on all finishes if
rubbing is light. Use in direction of
polish lines.
Household cleansers, such as Old
Dutch, Bon Ami, Ajax, Comet Rub with a damp cloth. May contain
chlorine bleaches. Rinse thoroughly
after use. Use in direction of polish lines.
May scratch or dull highly polished
finishes.
Heat Tint or Heavy Discoloration Revere Ware or Goddard’s stain-
less steel cleaner Apply with damp sponge or cloth. Use in direction of polish lines.
May scratch or dull highly polished
finishes.
Caked-on Foods and Grease,
Fatty Acids Milkstone (where
swabbing or rubbing is not
practical) Easy-Off oven cleaner Apply generous coating. Allow to
stand for 10 to 15 minutes. Rinse.
Repeated application may be
necessary. Excellent removal. S atisfactory for
use on all finishes.
Hard Water Spots and Scale Vinegar S wab or wipe with cloth. Rinse with
water and dry.
S atisfactory for use on all finishes.