Before-you-begin checklist
LonWorks Integration Guide
CARRIER CORPORATION ©2018
i-Vu® Link and Open Link
All rights reserved
2
Assumptions
You know how to create custom control programs in Snap.
You know how to install, wire, set up, and download memory to the i-Vu® Link/Open Link.
The LonWorks network/devices have been commissioned by the third-party representative
using LonMaker.
Items to be installed at the job site
Item
Notes
i-Vu® Link/Open Link
LonWorks module driver
drv_ivuopenlink_<latest version>.driver.
Echelon
®
SLTA-10 Serial LonTalk
®
Adapter
•
#73351 for FT-10 networks
•
#73352 for TP-78 networks
•
#73353 for TP-1250 networks
•
#73354 for RS-485 networks
You need 1 adapter for each i-Vu® Link/Open Link
that is connected to a LonWorks network segment.
Make sure you order the model that matches your
network topology. See the
Echelon website
) for your local Echelon
sales contact.
Echelon
®
power supply (part# 78010)
CAUTION!
You can damage the SLTA-10 if it does not have its
own isolated power supply.
EIA-232/RS-232 straight-through cable
with 9-pin connectors
and an S2-DB9 adapter (purchase S2-
DB9 from Carrier)
or
18-22 AWG, 4-conductor cable and a
DB9 male adapter
To connect the i-Vu® Link/Open Link to its SLTA-
10. You can buy an EIA-232/RS-232 cable with
connectors or buy 4-conductor cable and wire your
own connections.
Custom control programs (.equipment
files) and graphics (.view files)
Before-you-begin checklist
